LEMON Manuals: Even more car manuals for everyone
Home >> Lexus >> 2009 >> LS 460L RWD >> Repair and Diagnosis >> Body & Frame >> Exterior/Interior Trim >> Exterior >> Front Bumper >> Reassembly

Front Bumper: Reassembly

  1. INSTALL FRONT BUMPER PAD LH (for AWD) 
    1. Clean the front bumper surface.
      1. Using a heat light, heat the front bumper surface.

        Standard 

        STANDARD REFERENCE CHART

        Item Specified Condition
        Front bumper 20 to 30°C (68 to 86°F)
        NOTE: Do not heat the front bumper excessively.
      2. Remove the double-sided tape from the front bumper.
      3. Wipe off any tape adhesive residue with cleaner.
    2. Install a new bumper pad.
      1. Remove the peeling paper from the face of the bumper pad.

        HINT:

        After removing the peeling paper, keep the exposed adhesive free from foreign matter.

      2. Install the bumper pad to the front bumper.
  2. INSTALL FRONT BUMPER PAD RH (for AWD) 

    HINT:

    Use the procedure described for the LH side.

  3. INSTALL NO. 1 ULTRASONIC SENSOR (w/ Intuitive Parking Assist System) 
    1. Install the No. 1 ultrasonic sensor (See INSTALLATION ).
  4. INSTALL NO. 1 ULTRASONIC SENSOR RETAINER (w/ Intuitive Parking Assist System) 
    1. Install the No. 1 ultrasonic sensor retainer (See INSTALLATION ).
  5. INSTALL NO. 2 ULTRASONIC SENSOR (w/ Intuitive Parking Assist System) 
    1. Install the No. 2 ultrasonic sensor (See INSTALLATION ).
  6. INSTALL NO. 2 ULTRASONIC SENSOR RETAINER (w/ Intuitive Parking Assist System) 
    1. Install the No. 2 ultrasonic sensor retainer (See INSTALLATION ).
  7. INSTALL NO. 4 ENGINE ROOM WIRE (w/ Intuitive Parking Assist System)  (See INSTALLATION )
  8. INSTALL FOG LIGHT ASSEMBLY LH  (See INSTALLATION )
  9. INSTALL FOG LIGHT ASSEMBLY RH 

    HINT:

    Use the procedure described for the LH side.

  10. INSTALL FRONT BUMPER EXTENSION MOUNTING BRACKET 
    1. Install the mounting bracket with the 2 screws.
      Fig 1: Identifying Front Bumper Extension Mounting Bracket Screws
      G04946437Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  11. INSTALL LOWER RADIATOR GRILLE LH 
    1. Attach the 16 claws to install the lower radiator grille.
  12. INSTALL LOWER RADIATOR GRILLE RH 

    HINT:

    Use the procedure described for the LH side.

    Fig 2: Identifying Lower Radiator Grille LH Claws
    G04946436Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  13. INSTALL FRONT BUMPER LOWER COVER 
    1. Attach the 2 claws to install the bumper lower cover.

      HINT:

      Attach the claw on the outer side first.

      Fig 3: Identifying Front Bumper Lower Cover Claws
      G04946440Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
scientia non olet · About LEMON Manuals