Terminals Of Ecu
- CHECK SLIDING ROOF DRIVE GEAR SUB-ASSEMBLY (SLIDING ROOF ECU)
- Disconnect the X5 ECU connector.
- Measure the resistance and voltage according to the value(s) in the table below.TERMINAL DESCRIPTION
Terminal No. (Symbols) Wiring Color Terminal Description Condition Specified Condition X5-1 (B) - X5-2 (E) B - W-B +B power supply Always 11 to 14 V X5-5 (IG) - X5-2 (E) L - W-B Power supply Engine switch off Below 1 V X5-5 (IG) - X5-2 (E) L - W-B Power supply Engine switch on (IG) 11 to 14 V X5-7 (OPN) - X5-2 (E) G - W-B Sliding roof motor open SLIDE OPEN switch OFF 10 kΩ or higher X5-7 (OPN) - X5-2 (E) G - W-B Sliding roof motor open SLIDE OPEN switch ON Below 1 Ω X5-9 (CLS) - X5-2 (E) Y - W-B Sliding roof motor close SLIDE CLOSE switch OFF 10 kΩ or higher X5-9 (CLS) - X5-2 (E) Y - W-B Sliding roof motor close SLIDE CLOSE switch ON Below 1 Ω X5-10 (UP) - X5-2 (E) R - W-B Sliding roof motor up TILT UP switch OFF 10 kΩ or higher X5-10 (UP) - X5-2 (E) R - W-B Sliding roof motor up TILT UP switch ON Below 1 Ω X5-8 (DWN) - X5-2 (E) B - W-B Sliding roof motor down TILT DOWN switch OFF 10 kΩ or higher X5-8 (DWN) - X5-2 (E) B - W-B Sliding roof motor down TILT DOWN switch ON Below 1 Ω X5-2 (E) - Body ground W-B - Body ground Ground Always Below 1 Ω - Reconnect the X5 ECU connector.
- Measure the voltage according to the value(s) in the table below.TERMINAL DESCRIPTION
Terminal No. (Symbols) Wiring Color Terminal Description Condition Specified Condition X5-7 (OPN) - X5-2 (E) G - W-B Sliding roof motor open Engine switch on (IG), SLIDE OPEN switch OFF Below 1 V X5-7 (OPN) - X5-2 (E) G - W-B Sliding roof motor open Engine switch on (IG), SLIDE OPEN switch ON 11 to 14 V X5-9 (CLS) - X5-2 (E) Y - W-B Sliding roof motor close Engine switch on (IG), SLIDE CLOSE switch OFF Below 1 V X5-9 (CLS) - X5-2 (E) Y - W-B Sliding roof motor close Engine switch on (IG), SLIDE CLOSE switch ON 11 to 14 V X5-10 (UP) - X5-2 (E) R - W-B Sliding roof motor up Engine switch on (IG), TILT UP switch OFF Below 1 V X5-10 (UP) - X5-2 (E) R - W-B Sliding roof motor up Engine switch on (IG), TILT UP switch ON 11 to 14 V X5-8 (DWN) - X5-2 (E) B - W-B Sliding roof motor down Engine switch on (IG), TILT DOWN switch OFF Below 1 V X5-8 (DWN) - X5-2 (E) B - W-B Sliding roof motor down Engine switch on (IG), TILT DOWN switch ON 11 to 14 V If the result is not as specified, the ECU may have a malfunction.