Telephone Antenna: Installation

INSTALL TELEPHONE ANTENNA ASSEMBLY
1. Attach the 2 claws to install the telephone antenna.
  
  Fig 1: Identifying Telephone Antenna Claws
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
2. Install the antenna nut.
  Torque: 4.5 N*m (46 kgf*cm, 40 in.*lbf)
  
  Fig 2: Locating Antenna Nut
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
3. Connect the 2 connectors.
  
  Fig 3: Locating Antenna Cord Connectors
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
4. Attach the 2 claws to install the protector.
  
  Fig 4: Identifying Protector Claws
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
5. Attach the 4 claws to install the 2 antenna cord connectors.
Fig 5: Identifying Telephone Antenna Assembly Connectors With Claw
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
INSTALL ROOF HEADLINING ASSEMBLY
1. for Standard Body:
  Install the roof headlining (see INSTALLATION ).
2. for Long Body:
  Install the roof headlining (see INSTALLATION ).
CONNECT CABLE TO NEGATIVE BATTERY TERMINAL
PERFORM INITIALIZATION
1. Perform initialization (see INITIALIZATION ).
  NOTE: Certain systems need to be initialized after disconnecting and reconnecting the cable from the negative (-) battery terminal.
CHECK SRS WARNING LIGHT
1. Check the SRS warning light (see DIAGNOSIS SYSTEM ).