Typical Enabling Conditions
All
TYPICAL ENABLING CONDITIONS CHART
| The monitor will run whenever the following DTCs are not stored | P0096, P0097, P0098, P0111, P0112, P0113: IAT (Intake air temperature) sensor circuit P0115, P0117, P0118: ECT (Engine coolant temperature) sensor circuit P0120, P0122, P0123, P0220, P0222, P0223, P2102, P2103, P2118, P2135: ETCS (Electronic throttle control system) P0327, P0328, P032C, P032D, P0332, P0333, P033C, P033D: KCS sensor circuit P0500, P0502, P0503: Output speed sensor circuit P0712, P0713: ATF temperature sensor circuit P0715, P0717: Turbine speed sensor circuit P0748: Shift solenoid valve SL1 circuit P0778: Shift solenoid valve SL2 circuit P0798: Shift solenoid valve SL3 circuit P0985, P0986: Shift solenoid valve SR circuit P2610: Soak timer circuit P2810: Shift solenoid valve SL4 circuit P2819: Shift solenoid valve SL5 circuit U0100: CAN communication circuit (ECM - TCM) |
Condition (A)
TYPICAL ENABLING CONDITIONS CHART
| Time after engine start | 10 min. |
| Driving distance after engine start | 4.9 km (3.04 miles) or more |
| IAT (12 sec. after engine start) | 15°C (59°F) or higher |
| ECT (12 sec. after engine start) | 15°C (59°F) or higher |
| Soak time | 5 hr. or more |
Condition (B)
TYPICAL ENABLING CONDITIONS CHART
| Duration time for ECT to reach 60°C (140°F) | 10 sec. or more |
| ATF temperature (12 sec. after engine start) | 110°C (230°F) or higher |
| ECT (12 sec. after engine start) | Below 50°C (122°F) |