LEMON Manuals: Even more car manuals for everyone
Home >> Lexus >> 2009 >> LS 460 RWD >> Repair and Diagnosis >> Suspension >> Wheel Alignment >> Suspension - Service Information >> Front Shock Absorber >> Disposal

Front Shock Absorber: Disposal

  1. DISPOSE OF FRONT SHOCK ABSORBER ASSEMBLY LH 
    1. Fully extend the front shock absorber rod.
    2. Using a drill, make a hole in the cylinder between A and B shown in the illustration to discharge the gas inside.
      CAUTION: Be careful when drilling because shards of metal may fly about. Always use the proper safety equipment.
      NOTE: The gas is colorless, odorless and nonpoisonous.
      Fig 1: Identifying Front Shock Absorber Rod Dimension
      G04949354Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
scientia non olet · About LEMON Manuals