Multiplex Tilt And Telescopic Ecu: Removal

HINT:

Refer to the instructions for removal of the steering column assembly (See REMOVAL ).

1. Using a center punch, mark the center of the 2 tapered-head bolts.
2. Using a 3 to 4 mm (0.12 to 0.16 in.) drill, drill a hole in the 2 bolts.
3. Using a screw extractor, remove the 2 bolts and steering lock actuator assembly from the steering column assembly.

Fig 1: Removing Steering Lock Actuator Assembly

Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

1. Disconnect the ECU connector.
2. Using a screwdriver, remove the 2 screws and ECU.

Fig 2: Locating Multiplex Tilt, Telescopic ECU And Screws

Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002