LEMON Manuals: Even more car manuals for everyone
Home >> Lexus >> 2009 >> LS 460 RWD >> Repair and Diagnosis >> Body & Frame >> Exterior/Interior Trim >> Exterior >> Front Bumper >> Disassembly

Front Bumper: Disassembly

  1. REMOVE FRONT BUMPER LOWER COVER 
    1. Using a screwdriver, detach the 2 claws and remove the bumper lower cover.

      HINT:

      • Tape the screwdriver tip before use.
      • Detach the claw on the inner side first.
  2. REMOVE LOWER RADIATOR GRILLE LH 
    1. Detach the 16 claws and remove the lower radiator grille.
      Fig 1: Removing Lower Radiator Grille LH Claws
      G04946436Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  3. REMOVE LOWER RADIATOR GRILLE RH 

    HINT:

    Use the procedure described for the LH side.

  4. REMOVE FRONT BUMPER EXTENSION MOUNTING BRACKET 
    1. Remove the 2 screws and mounting bracket.
      Fig 2: Identifying Front Bumper Extension Mounting Bracket Screws
      G04946437Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  5. REMOVE FOG LIGHT ASSEMBLY LH  (See REMOVAL )
  6. REMOVE FOG LIGHT ASSEMBLY RH 

    HINT:

    Use the procedure described for the LH side.

  7. REMOVE NO. 4 ENGINE ROOM WIRE (w/ Intuitive Parking Assist System)  (See REMOVAL )
  8. REMOVE NO. 1 ULTRASONIC SENSOR (w/ Intuitive Parking Assist System)  (See REMOVAL )
  9. REMOVE NO. 2 ULTRASONIC SENSOR (w/ Intuitive Parking Assist System)  (See REMOVAL )
  10. REMOVE NO. 1 ULTRASONIC SENSOR RETAINER (w/ Intuitive Parking Assist System)  (See REMOVAL )
  11. REMOVE NO. 2 ULTRASONIC SENSOR RETAINER (w/ Intuitive Parking Assist System)  (See REMOVAL )
  12. REMOVE FRONT BUMPER PAD LH (for AWD) 
    1. Remove the bumper pad from the front bumper.
  13. REMOVE FRONT BUMPER PAD RH (for AWD) 

    HINT:

    Use the procedure described for the LH side.

scientia non olet · About LEMON Manuals