Inspection Procedure

CHECK FOR DTC (SFI SYSTEM)
1. Enter the following menus: Powertrain/Engine/Trouble Code.
2. Check for DTC.
  OK:
  
  SFI system DTC is not output.
  
  NG: GO TO SFI SYSTEM (See DIAGNOSTIC TROUBLE CODE CHART )
  
  OK: Go to next step
CHECK FOR DTC (AUTOMATIC TRANSMISSION SYSTEM)
1. Enter the following menus: Powertrain/ECT/Trouble Code.
2. Check for DTC.
  OK:
  
  Electronic controlled automatic transmission system DTC is not output.
  
  NG: GO TO AUTOMATIC TRANSMISSION SYSTEM (See DIAGNOSTIC TROUBLE CODE CHART )
  
  OK: REPLACE DRIVING SUPPORT ECU (See REMOVAL )