Typical Enabling Conditions
TYPICAL ENABLING CONDITIONS - ENGINE COOLANT TEMPERATURE SENSOR COLD START MONITOR
| Monitor runs whenever following DTCs not present | None |
| Battery voltage | 10.5 V or more |
| Time after engine start | 1 second or more |
| Engine coolant temperature at engine start | Less than 60°C (140°F) |
| Intake air temperature sensor circuit (P0112, P0113) | OK |
| Soak time | 0 second or more |
| Accumulated mass air flow | 2080 g or more |
| Fuel cut | OFF |
| Difference between engine coolant temperature at engine start and intake air temperature | Less than 40°C (104°F) |
TYPICAL ENABLING CONDITIONS - ENGINE COOLANT TEMPERATURE SENSOR SOAK MONITOR
| Monitor runs whenever following DTCs not present | P0101, P0102, P0103: Mass air flow meter |
| Battery voltage | 10.5 V or more |
| Engine | Running |
| Soak time | 5 hours or more |
| Either of the following conditions is met | (a) or (b) |
| (a) Engine coolant temperature | 60°C (140°F) or more |
| (b) Accumulated mass air flow | 4009 g or more |