Camshaft Position Sensor: Installation: Installation

WARNING: This page is about a different car, the 2009 Lexus IS F. However, it is still accessible from the selected car via links, so may be relevant.

INSTALL CAMSHAFT POSITION SENSOR
1. Install the camshaft position sensor with the bolt.
  
  Fig 1: Locating Camshaft Position Sensor, Bolt, & Connector
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  
  Torque: 10 N*m ( 102 kgf*cm, 7 ft.*lbf)
2. Connect the camshaft position sensor connector.
INSTALL VVT SENSOR (for Bank 1)
1. Install the 2 VVT sensors with the 2 bolts.
  
  Fig 2: Locating VVT Sensors, Connectors, & Bolts
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  
  Torque: 10 N*m ( 102 kgf*cm, 7 ft.*lbf)
2. Connect the VVT sensor connectors.
3. Connect the 3 wire harness clamps.
  
  Fig 3: Locating Wire Harness Clamps
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
INSTALL VVT SENSOR (for Bank 2)
1. Install the 2 VVT sensors with the 2 bolts.
  
  Fig 4: Locating VVT Sensors, Connectors, & Bolts
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  
  Torque: 10 N*m ( 102 kgf*cm, 7 ft.*lbf)
2. Connect the VVT sensor connectors.
3. Connect the wire harness clamp.
  
  Fig 5: Locating Wire Harness Clamp
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
INSPECT FOR OIL LEAK
INSTALL V-BANK COVER SUB-ASSEMBLY . Refer to INSTALLATION - Step 95