Map Disc cannot be Ejected: Procedure

1. Turn the engine switch on (ACC).
2. Keep pressing the MAP eject switch for 5 seconds and check if the disc is ejected by forced ejection.

   OK

   The disc is ejected.

NG → PROCEED TO NEXT CIRCUIT INSPECTION SHOWN IN  PROBLEM SYMPTOMS TABLE 

OK: Go to next step 

1. Check that the map disc is not deformed or cracked.
   Fig 1: Identifying Deformed Or Cracked Disc Condition

   Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

   OK

   No deformations or cracks on the map disc.

NG → REPLACE MAP DISC 

OK → END