Driver Side Door UNLOCK Detection Switch Circuit: Description

The driver's door unlock detection switch is built into the front door lock assembly LH. The switch turns on when the driver's door is locked and turns off when the door is unlocked.

The multiplex network master switch assembly is connected to the driver's door lock assembly via terminal LSW and driver's door lock/unlock state signals are received by the multiplex network master switch assembly.

The multiplex network master switch assembly applies voltage to the door unlock detection switch via terminal LSW. When the door unlock detection switch is on (there is continuity between the switch terminals), a lock state signal is received by the multiplex network master switch assembly. When the switch is off (there is no continuity between the switch terminals), an unlock state signal is received.

The multiplex network master switch assembly sends driver's door lock/unlock state information to the main body ECU RH using multiplex communication.