Fuel Relief Valve: Installation: Installation

INSTALL FUEL RELIEF VALVE ASSEMBLY
1. Install a new gasket to the relief valve.
  
  Fig 1: Locating Relief Valve
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
2. Using a 14 mm deep socket wrench, install the relief valve to the No. 2 delivery pipe.
  Torque: 40 N*m ( 408 kgf*cm, 29 ft.*lbf)
  NOTE:
  - Do not apply oil to the threads of the relief valve and delivery pipe.
  - Do not allow foreign matter to enter the pipe during the installation.
3. Install the No. 1 fuel pipe sub-assembly.
4. Connect the No. 3 fuel hose.
  
  Fig 2: Identifying No. 3 Fuel Hose
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
INSTALL NO. 1 ENGINE COVER SUB-ASSEMBLY See step 9
INSTALL INTAKE MANIFOLD
1. Install the intake manifold Refer to INSTALLATION .
CONNECT CABLE TO NEGATIVE BATTERY TERMINAL
NOTE:
When disconnecting the cable, some systems need to be initialized after the cable is reconnected Refer to INITIALIZATION .
ADD ENGINE COOLANT . Refer to REPLACEMENT - Step 4
INSPECT FOR COOLANT LEAK . Refer to ON-VEHICLE INSPECTION - Step 1
INSPECT FOR FUEL LEAK . Refer to ON-VEHICLE INSPECTION - Step 1