Window Defogger Wire: Repair: Repair

IF NECESSARY, REPAIR THE DEFOGGER WIRE

Fig 1: Placing Masking Tape Along Both Sides Of Wire
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
1. Clean the broken wire tips with grease, wax and silicone remover.
2. Place the masking tape along both sides of the wire.
3. Thoroughly mix the repair agent (Dupont paste No. 4817 or equivalent).
  
  Fig 2: Applying Small Amount Of Agent To Wire
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
4. Using a fine tip brush, apply a small amount of the agent to the wire.
5. After a few minutes, remove the masking tape.
  NOTE:
  Do not repair the defogger wire again for at least 24 hours.