Typical Enabling Conditions
ECT SENSOR COLD START MONITOR:
| Monitor runs whenever these DTCs are not present | None |
| Battery voltage | 10.5 V or more |
| Time after engine start | 1 second or more |
| ECT at engine start | Less than 60°C (140°F) |
| IAT sensor circuit (P0110, P0112, P0113) | OK |
| Soak time | 0 seconds or more |
| Accumulated MAF | 1032 g or more |
| Fuel cut | OFF |
| Difference between ECT at engine start and IAT | Less than 40°C (104°F) |
ECT SENSOR SOAK MONITOR:
| Monitor runs whenever these DTCs are not present | None |
| Battery voltage | 10.5 V or more |
| Engine | Running |
| IAT sensor circuit (P0110, P0112, P0113) | OK |
| Soak time | 5 hours or more |
| ECT at engine start | 60°C (140°F) or more |
| Accumulated MAF | 2105 g or more |