LEMON Manuals: Even more car manuals for everyone
Home >> Lexus >> 2009 >> GS 350 RWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 14 (Starting (Service Information)) >> Engine Switch >> Removal >> Removal

Engine Switch: Removal: Removal

WARNING: This page is about a different car, the 2009 Lexus GS 460. However, it is still accessible from the selected car via links, so may be relevant.
  1. PRECAUTION 

    Refer to PRECAUTION

  2. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL 
  3. REMOVE FRONT CONSOLE UPPER PANEL GARNISH  . Refer to REMOVAL - Step 1
  4. REMOVE CONSOLE UPPER PANEL ASSEMBLY  . Refer to REMOVAL - Step 2
  5. REMOVE INSTRUMENT PANEL FINISH PANEL END LH  . Refer to REMOVAL - Step 4
  6. REMOVE FRONT DOOR SCUFF PLATE LH  . Refer to REMOVAL - Step 9
  7. REMOVE FRONT DOOR OPENING TRIM COVER LH  . Refer to REMOVAL - Step 11
  8. REMOVE INSTRUMENT SIDE PANEL LH  . Refer to REMOVAL - Step 27
  9. REMOVE INSTRUMENT PANEL NO. 1 UNDER COVER SUB-ASSEMBLY  . Refer to REMOVAL - Step 28
  10. REMOVE INSTRUMENT PANEL NO. 1 SAFETY PAD SUB-ASSEMBLY  . Refer to REMOVAL - Step 29
  11. REMOVE DRIVER SIDE KNEE AIRBAG ASSEMBLY  . Refer to REMOVAL - Step 10
  12. REMOVE ENGINE SWITCH 
    1. Disconnect the switch connector.
      Fig 1: Identifying Engine Start/Stop Switch
      GTY102282Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    2. Detach the 2 claws and remove the switch.
scientia non olet · About LEMON Manuals