Shift Lever: Adjustment: Adjustment

ADJUST SHIFT LEVER POSITION
1. Move the shift lever to N.
2. Remove the nut and transmission control cable from the control shaft lever.
  
  Fig 1: Locating Transmission Control Shaft Nut
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
3. Align the protrusions of the park/neutral position switch.
  
  Fig 2: Identifying Protrusions Of Park/Neutral Position Switch
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
4. Move the slider in the direction indicated by arrow A and pull up the lock piece in the direction indicated by arrow B.
  
  Fig 3: Locating Lock Piece And Slider
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  
  NOTE:
  Do not damage the boot.
5. Connect the transmission control cable assembly to the control shaft lever with the nut.
  
  Fig 4: Locating Transmission Control Shaft Nut
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  
  Torque: 13 N*m ( 130 kgf*cm, 9 ft.*lbf)
6. Push in the lock piece.
  
  Fig 5: Locating Lock Piece
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  
  NOTE:
  Firmly push in the lock piece until the slider lock is engaged.
7. Start the engine and make sure that the vehicle moves forward when moving the lever from N to D and moves rearward when moving it to R.
  If it becomes hard to move the shift lever, readjust the shift lever position.