Name Plate: Installation: Installation

WARNING: This page is about a different car, the 2009 Lexus GS 460 and 2009 Lexus GS 350. However, it is still accessible from the selected car via links, so may be relevant.

HINT:

When installing the emblem and name plate, heat the vehicle body, emblem and name plate using a heat light.

Heating temperature

Item	Temperature
Vehicle Body	40 to 60°C (104 to 140°F)
Emblem	20 to 30°C (68 to 86°F)
Name Plate	20 to 30°C (68 to 86°F)

NOTE:

Do not heat the vehicle body, emblem and name plate excessively.

INSTALL LUGGAGE COMPARTMENT DOOR EMBLEM
1. Clean the vehicle body surface.
  1. Using a heat light, heat the vehicle body surface.
  2. Remove the double-sided tape from the vehicle body.
  3. Wipe off any tape adhesive residue with cleaner.
2. If reusing the emblem:
  Clean the emblem.
  1. Using a heat light, heat the emblem.
  2. Remove the double-sided tape from the emblem.
  3. Wipe off any tape adhesive residue with cleaner.
  4. Apply new double-sided tape to the emblem.
3. Install the emblem.
  1. Using a heat light, heat the vehicle body and emblem.
  2. Remove the peeling paper from the face of the emblem.
    HINT:
    
    After removing the peeling paper, keep the exposed adhesive free from foreign matter.
  3. Install the emblem.
INSTALL LUGGAGE COMPARTMENT NO. 1 DOOR NAME PLATE
1. Clean the vehicle body surface.
  1. Using a heat light, heat the vehicle body surface.
  2. Remove the double-sided tape from the vehicle body.
  3. Wipe off any tape adhesive residue with cleaner.
2. If reusing the name plate:
  Clean the name plate.
  1. Using a heat light, heat the name plate.
  2. Remove the double-sided tape from the name plate.
  3. Wipe off any tape adhesive residue with cleaner.
  4. Apply new double-sided tape to the name plate.
3. Install the name plate.
  1. Using a heat light, heat the vehicle body and name plate.
  2. Remove the peeling paper from the face of the name plate.
    HINT:
    
    After removing the peeling paper, keep the exposed adhesive free from foreign matter.
  3. Install the name plate.
INSTALL LUGGAGE COMPARTMENT NO. 3 DOOR PLATE
1. Clean the vehicle body surface.
  1. Using a heat light, heat the vehicle body surface.
  2. Remove the double-sided tape from the vehicle body.
  3. Wipe off any tape adhesive residue with cleaner.
2. If reusing the door plate:
  Clean the door plate.
  1. Using a heat light, heat the door plate.
  2. Remove the double-sided tape from the door plate.
  3. Wipe off any tape adhesive residue with cleaner.
  4. Apply new double-sided tape to the door plate.
3. Install the door plate.
  1. Using a heat light, heat the vehicle body and door plate.
  2. Remove the peeling paper from the face of the door plate.
    HINT:
    
    After removing the peeling paper, keep the exposed adhesive free from foreign matter.
  3. Install the door plate.