LEMON Manuals: Even more car manuals for everyone
Home >> Lexus >> 2009 >> ES 350 >> Repair and Diagnosis (Single Page) >> Engine Performance >> Remove, Overhaul & Install >> Engine Control System (Service Information) >> Ignition Relay No. 2 >> Inspection >> Inspection

Ignition Relay No. 2: Inspection: Inspection

  1. INSPECT IGNITION RELAY NO. 2 
    1. Using an ohmmeter, measure the resistance according to the value(s) in the table below.
      Fig 1: Identifying Relay Test Terminals
      GTY141650Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

      Standard resistance

      Tester Connection Specified Condition
      3 - 5 10 kΩ or higher
      3 - 5 Below 1 Ω (Battery voltage applied between terminals 1 and 2)

      If the result is not as specified, replace the relay.

scientia non olet · About LEMON Manuals