Data List / Active Test
- READ DATA LIST
HINT:
Using Techstream Data List allows switch, actuator and other item values to be read without removing any parts. Reading the Data List early in troubleshooting is one way to save time.
- Connect the Techstream to the DLC3.
- Turn the ignition switch ON.
- Read the Data List according to the display on the tester.
Multiplex tilt and telescopic ECU
ITEM DESCRIPTION CHARTTester Display Measurement Item / Range Normal Condition Diagnostic Note T&T Autoway Function Auto away and return function / ON or OFF ON: Auto away and return function is enabled
OFF: Auto away and return function is disabled- Tilt Position Current tilt position data / Min.: 0000 H (0 edge)
Max.: FFFF H (65535 edge)7000 to 9000 H (28672 to 36864 edge) - Telesco Position Current telescopic position data / Min.: 0000 H (0 edge)
Max.: FFFF H (65535 edge)7000 to 9000 H (28672 to 36864 edge) - Tilt Return Position Memorized tilt return position data / Min.: 0000 H (0 edge)
Max.: FFFF H (65535 edge)7000 to 9000 H (28672 to 36864 edge) - Telesco Return Position Memorized telescopic return position data / Min.: 0000 H (0 edge)
Max.: FFFF H (65535 edge)7000 to 9000 H (28672 to 36864 edge) - T&T Mem1 Tilt & telescopic memory position 1 / NOT MEM or MEM NOT MEM: Position is not memorized
MEM: Position is memorized- Tilt Memory Pos 1 Tilt data of memory position 1 / Min.: 0000 H (0 edge)
Max.: FFFF H (65535 edge)7000 to 9000 H (28672 to 36864 edge) - Telesco Memory Pos 1 Telescopic data of memory position 1 / Min.: 0000 H (0 edge)
Max.: FFFF H (65535 edge)7000 to 9000 H (28672 to 36864 edge) - T&T Mem2 Tilt & telescopic memory position 2 / NOT MEM or MEM NOT MEM: Position is not memorized
MEM: Position is memorized- Tilt Memory Pos 2 Tilt data of memory position 2 / Min.: 0000 H (0 edge)
Max.: FFFF H (65535 edge)7000 to 9000 H (28672 to 36864 edge) - Telesco Memory Pos 2 Telescopic data of memory position 2 / Min.: 0000 H (0 edge)
Max.: FFFF H (65535 edge)7000 to 9000 H (28672 to 36864 edge) - Tilt Up Limit Uppermost tilt position / NOT MEM or MEM NOT MEM: Position is not memorized
MEM: Position is memorized- Tilt Up Limit Position Uppermost tilt position data / Min.: 0000 H (0 edge)
Max.: FFFF H (65535 edge)7000 to 9000 H (28672 to 36864 edge) - Tilt Down Limit Pos Lowermost tilt position / NOT MEM or MEM NOT MEM: Position is not memorized
MEM: Position is memorized- Tilt Down Limit Position Lowermost tilt position data / Min.: 0000 H (0 edge)
Max.: FFFF H (65535 edge)7000 to 9000 H (28672 to 36864 edge) - Telesco Short Limit Pos Shortest telescopic position / NOT MEM or MEM NOT MEM: Position is not memorized
MEM: Position is memorized- Telesco Short Limit Pos Shortest telescopic position data / Min.: 0000 H (0 edge)
Max.: FFFF H (65535 edge)7000 to 9000 H (28672 to 36864 edge) - Telesco Long Limit Longest telescopic position / NOT MEM or MEM NOT MEM: Position is not memorized
MEM: Position is memorized- Telesco Long Limit Pos Longest telescopic position data / Min.: 0000 H (0 edge)
Max.: FFFF H (65535 edge)7000 to 9000 H (28672 to 36864 edge) - Tilt Up SW(MPX) Tilt up input from manual switch (UP) / ON or OFF ON: Switch is pressed
OFF: Switch is not pressed- Tilt Down SW(MPX) Tilt down input from manual switch (DOWN) / ON or OFF ON: Switch is pressed
OFF: Switch is not pressed- Telesco Short SW(MPX) Telescopic contacts input from manual switch (SHORT) / ON or OFF ON: Switch is pressed
OFF: Switch is not pressed- Telesco Long SW(MPX) Telescopic extends input from manual switch (LONG) / ON or OFF ON: Switch is pressed
OFF: Switch is not pressed- Power Source Voltage Voltage data of power supply / Min.: 0 V
Max.: 20 VActual power supply voltage 10 to 14 V - Freeze Speed Info Vehicle speed data / Min.: 0 km/h (0 mph)
Max.: 255 km/h (158 mph)Available only for vehicles with freeze frame data - IG Switch (MPX) Communication state of ignition switch/ON or OFF ON: Communication is normal
OFF: Communication is interrupted- IG Switch Input state of ignition switch / ON or OFF ON: Input signal is normal
OFF: Input signal is interrupted- Key Switch/MPX Communication state of unlock warning switch/ON or OFF ON: Communication is normal
OFF: Communication is interrupted- Receive from Body Communication state of body ECU signal/OK or Interruption OK: Communication is normal
Interruption: Communication is interrupted- Receive from Seat ECU Communication state of seat ECU signal/OK or Interruption OK: Communication is normal
Interruption: Communication is interrupted- Receive from Combi Communication state of turn signal switch assy (combination switch) signal/OK or Interruption OK: Communication is normal
Interruption: Communication is interrupted- Sterling lock ECU Info Communication state of steering lock ECU signal/OK or Interruption OK: Communication is normal
Interruption: Communication is interrupted- The Number of DTCs Number of diagnosis code / min.:0, max.:255 Actual Number of diagnosis codes -
- POWER ACTIVE TEST
HINT:
Performing techstream Active Test allows relay, VSV, actuator, and other items to be operated without removing any parts. Performing the Active Test early in troubleshooting is one way to save time.
The Data List can be displayed during the Active Test.
- Connect Techstream to the DLC3.
- Turn the ignition switch ON.
- Perform the Active Test according to the display on the tester.
Multiplex tilt and telescopic ECU
ITEM DESCRIPTION CHARTTester Display Test Part Control Range Diagnostic Note Tilt operation Tilt operation UP or DOWN - Telesco Operation Telescopic operation LONG or SHORT -