Package Tray Trim: Inspection
WARNING: This page is about a different car, the 2007 Lexus SC 430. However, it is still accessible from the selected car via links, so may be relevant.
- INSPECT PACKAGE TRAY TRIM ASSEMBLY
- Disconnect the P8 tray motor connector.
- Apply battery voltage to the tray motor terminal and check operation of the package tray trim.
OK
MEASUREMENT CONDITION CHARTMeasurement Condition Specified Condition Battery positive (+) → Terminal 1
Battery negative (-) → Terminal 2Moves to CLOSE 2 position Battery positive (+) → Terminal 2
Battery negative (-) → Terminal 1Moves to CLOSE 1 position If the result is not as specified, replace the package tray trim assembly.