Rocker Panel Moulding: Removal

WARNING: This page is about a different car, the 2007 Lexus SC 430. However, it is still accessible from the selected car via links, so may be relevant.

HINT:

Use the same procedures for the RH side and LH side.
The procedures listed below are for the LH side.

REMOVE NO. 2 ROCKER PANEL MOULDING PROTECTOR
1. Remove the screw, 2 clips and rocker panel moulding protector.
REMOVE ROCKER PANEL MOULDING LH
1. Remove the 2 screws and 5 clips.
  
  Fig 1: Identifying Rocker Panel Moulding LH Screws
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
2. Remove the 5 screws, 5 clips and moulding.
  
  Fig 2: Identifying Rocker Panel Moulding Clips And Screws
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002