Engine Hood Moulding: Replacement

WARNING: This page is about a different car, the 2007 Lexus SC 430. However, it is still accessible from the selected car via links, so may be relevant.

HINT:

A bolt without a torque specification is shown in the standard bolt chart (see SPECIFIED TORQUE FOR STANDARD BOLTS ).

REMOVE ENGINE HOOD MOULDING
1. Remove the 5 bolts and moulding.
  
  Fig 1: Identifying Engine Hood Moulding Bolts
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
INSTALL ENGINE HOOD MOULDING
1. Install the moulding with the 5 bolts.
  
  Fig 2: Identifying Engine Hood Moulding Bolts
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002