AFS Ecu: Removal
WARNING: This page is about a different car, the 2007 Lexus SC 430. However, it is still accessible from the selected car via links, so may be relevant.
HINT:
A bolt without a torque specification is shown in the standard bolt chart (see SPECIFIED TORQUE FOR STANDARD BOLTS ).
- DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL CAUTION: Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to prevent airbag and seat belt pretensioner activation.
- REMOVE DOOR SCUFF PLATE ASSEMBLY LH (See REMOVAL )
- REMOVE FRONT DOOR OPENING TRIM COVER LH (See REMOVAL )
- REMOVE HOOD LOCK CONTROL LEVER SUB-ASSEMBLY
- Remove the 2 bolts and hood control lever.
- REMOVE NO. 1 INSTRUMENT PANEL SAFETY PAD SUB-ASSEMBLY (See REMOVAL )
- REMOVE AFS ECU
- Disconnect the ECU connector.
- Remove the 2 bolts and ECU.