Front Passenger Airbag Assembly: Installation
WARNING: This page is about a different car, the 2007 Lexus SC 430. However, it is still accessible from the selected car via links, so may be relevant.
CAUTION:
Be sure to read the precautionary notices concerning the SRS airbag system before servicing it (see AIRBAG SYSTEM
).
- INSTALL FRONT PASSENGER AIRBAG ASSEMBLY
- Install the front passenger airbag with the 2 screws.
- Install the strap to the bracket.
- Install the 2 bolts.
- REMOVE INSTRUMENT PANEL REINFORCEMENT (See INSTALLATION )
- REMOVE NO. 2 HEATER TO REGISTER DUCT (See INSTALLATION )
- REMOVE NO. 3 HEATER TO REGISTER DUCT (See INSTALLATION )
- REMOVE NO. 1 HEATER TO REGISTER DUCT (See INSTALLATION )
- REMOVE FRONT DEFROSTER NOZZLE (See INSTALLATION )
- REMOVE NO. 2 SIDE DEFROSTER NOZZLE DUCT (See INSTALLATION )
- REMOVE NO. 1 SIDE DEFROSTER NOZZLE DUCT (See INSTALLATION )
- REMOVE NO. 1 DEFROSTER NOZZLE GARNISH (See INSTALLATION )
- REMOVE NO. 1 INSTRUMENT PANEL PIN (See INSTALLATION )
- REMOVE INSTRUMENT PANEL FINISH PLATE
- REMOVE STEERING COLUMN ASSEMBLY (See INSTALLATION )
- REMOVE NO. 4 HEATER TO REGISTER DUCT (See INSTALLATION )
- REMOVE AUTOMATIC LIGHT CONTROL SENSOR (See INSTALLATION )
- REMOVE INSTRUMENT PANEL SAFETY PAD SUB-ASSEMBLY
- Install the instrument panel safety pad (see INSTALLATION ).
- CONNECT CABLE TO NEGATIVE BATTERY TERMINAL
- PERFORM INITIALIZATION
- Perform initialization (see
INITIALIZATION
).NOTE: Certain systems need to be initialized after disconnecting and reconnecting the cable from the negative (-) battery terminal.
- Perform initialization (see
INITIALIZATION
).
- CHECK SRS WARNING LIGHT
- Check the SRS warning light (see DIAGNOSIS SYSTEM ).