LEMON Manuals: Even more car manuals for everyone
Home >> Lexus >> 2008 >> SC 430 >> Repair and Diagnosis >> External Pages >> Different car >> Section 34 (Interior) >> Roof Headlining >> Reassembly

Roof Headlining: Reassembly

WARNING: This page is about a different car, the 2007 Lexus SC 430. However, it is still accessible from the selected car via links, so may be relevant.
  1. INSTALL ROOF HEADLINING ASSEMBLY REAR 
    1. Attach the 7 clips to install the headlining.
      Fig 1: Identifying Clips And Headlining
      G05293971Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  2. INSTALL ROOF SIDE GARNISH INNER LH 
    1. Attach the 7 clips and claw to install the garnish.
    2. Install the clip labeled A.
    3. Fig 2: Identifying Clip Labeled A
    G05293972Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  3. INSTALL ROOF SIDE GARNISH INNER RH 

    HINT:

    Use the same procedures described for the LH side.

  4. INSTALL ROOF HEADLINING ASSEMBLY CENTER 
    1. Attach the 3 clips labeled A to install the headlining.
    2. Install the 5 clips.
      Fig 3: Identifying Clips Labeled A
      G05293973Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  5. INSTALL ROOF SIDE RAIL GARNISH ASSEMBLY LH 
    1. Attach the 4 clips and 3 claws to install the garnish.
  6. INSTALL ROOF SIDE RAIL GARNISH ASSEMBLY RH 

    HINT:

    Use the same procedures described for the LH side.

    Fig 4: Identifying Clips, Claws And Garnish
    G05293974Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  7. INSTALL ROOF HEADLINING ASSEMBLY 
    1. Push the headlining as indicated by the arrow in the illustration to attach the 4 claws. Then install the headlining.
      Fig 5: Pushing Headlining
      G05293975Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    2. Install the 2 clips.
      Fig 6: Identifying Clips
      G05293976Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  8. INSTALL ROOF FRONT CORNER HEADLINING LH 
    1. Attach the 2 clips to install the headlining.
  9. INSTALL ROOF FRONT CORNER HEADLINING RH 

    HINT:

    Use the same procedures described for the LH side.

    Fig 7: Identifying Clips And Headlining
    G05293977Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  10. INSTALL MAP LIGHT ASSEMBLY 
    1. Connect the map light connector.
    2. Install the map light with the 2 screws.
    3. Install the 2 lenses.
  11. INSTALL VISOR HOLDER 
    1. Install the 2 holders by turning them clockwise.
  12. INSTALL VISOR ASSEMBLY LH 
    1. Install the visor with the 2 screws.
      Fig 8: Identifying Visor And Screws
      G05293978Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  13. INSTALL VISOR ASSEMBLY RH 
    1. Install the visor with the 2 screws.
  14. INSTALL VISOR BRACKET COVER LH 
    1. Attach the 3 claws to install the bracket cover.
  15. INSTALL VISOR BRACKET COVER RH 

    HINT:

    Use the same procedures described for the LH side.

  16. INSTALL FRONT PILLAR GARNISH LH 
    1. Attach the 2 clips to install the garnish.
  17. INSTALL FRONT PILLAR GARNISH RH 

    HINT:

    Use the same procedures described for the LH side.

    Fig 9: Identifying Clips And Garnish
    G05293979Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  18. INSTALL FRONT DOOR OPENING TRIM COVER LH 
    1. Attach the 3 claws to install the trim cover.
  19. INSTALL FRONT DOOR OPENING TRIM COVER RH 

    HINT:

    Use the same procedures described for the LH side.

    Fig 10: Identifying Claws And Trim Cover
    G05293980Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  20. INSTALL DOOR SCUFF PLATE ASSEMBLY LH 
    1. Attach the 6 claws and 5 clips to install the scuff plate.
  21. INSTALL DOOR SCUFF PLATE ASSEMBLY RH 

    HINT:

    Use the same procedures described for the LH side.

    Fig 11: Identifying Claws, Clips And Scuff Plate
    G05293981Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  22. CLOSE ROOF PANEL 
    1. Close the roof panel (see MANUAL CLOSE OPERATION ).
scientia non olet · About LEMON Manuals