LEMON Manuals: Even more car manuals for everyone
Home >> Lexus >> 2008 >> SC 430 >> Repair and Diagnosis >> External Pages >> Different car >> Section 34 (Interior) >> Roof Headlining >> Disassembly

Roof Headlining: Disassembly

WARNING: This page is about a different car, the 2007 Lexus SC 430. However, it is still accessible from the selected car via links, so may be relevant.
  1. OPEN ROOF PANEL HALFWAY 
    1. Open the roof panel halfway (see MANUAL OPEN OPERATION ).
      Fig 1: Opening Roof Panel Halfway
      G05293957Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  2. REMOVE DOOR SCUFF PLATE ASSEMBLY RH 
    1. Using a clip remover, detach the 5 clips.
    2. Using a screwdriver, detach the 6 claws and remove the scuff plate.

      HINT:

      Tape the screwdriver tip before use.

  3. REMOVE DOOR SCUFF PLATE ASSEMBLY LH 

    HINT:

    Use the same procedures described for the RH side.

    Fig 2: Identifying Claws And Scuff Plate
    G05293958Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  4. REMOVE FRONT DOOR OPENING TRIM COVER RH 
    1. Using a screwdriver, detach the 3 claws and remove the trim cover.

      HINT:

      Tape the screwdriver tip before use.

  5. REMOVE FRONT DOOR OPENING TRIM COVER LH 

    HINT:

    Use the same procedures described for the RH side.

    Fig 3: Identifying Claws And Trim Cover
    G05293959Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  6. REMOVE FRONT PILLAR GARNISH RH 
    1. Using a screwdriver, detach the 2 clips and remove the garnish.

      HINT:

      Tape the screwdriver tip before use.

  7. REMOVE FRONT PILLAR GARNISH LH 

    HINT:

    Use the same procedures described for the RH side.

    Fig 4: Identifying Clips And Garnish
    G05293960Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  8. REMOVE VISOR BRACKET COVER RH 
    1. Using a screwdriver, detach the 3 claws and remove the bracket cover.

      HINT:

      Tape the screwdriver tip before use.

  9. REMOVE VISOR BRACKET COVER LH 

    HINT:

    Use the same procedures described for the RH side.

  10. REMOVE VISOR ASSEMBLY RH 
    1. Remove the 2 screws and visor.
      Fig 5: Removing Bracket Cover
      G05293961Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  11. REMOVE VISOR ASSEMBLY LH 
    1. Remove the 2 screws and visor.
  12. REMOVE VISOR HOLDER 
    1. Remove the 2 holders by turning them counterclockwise.
      Fig 6: Turning Holders Counterclockwise
      G05293962Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  13. REMOVE MAP LIGHT ASSEMBLY 
    1. Using a screwdriver, pry out the 2 lenses.

      HINT:

      Tape the screwdriver tip before use.

    2. Remove the 2 screws and map light.
    3. Disconnect the map light connector.
      Fig 7: Identifying Screws And Map Light
      G05293963Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  14. REMOVE ROOF FRONT CORNER HEADLINING RH 
    1. Using a screwdriver, detach the 2 clips and remove the headlining.

      HINT:

      Tape the screwdriver tip before use.

  15. REMOVE ROOF FRONT CORNER HEADLINING LH 

    HINT:

    Use the same procedures described for the RH side.

    Fig 8: Identifying Clips And Headlining
    G05293964Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  16. REMOVE ROOF HEADLINING ASSEMBLY 
    1. Using a clip remover, remove the 2 clips.
      Fig 9: Identifying Roof Headlining Assembly Clips
      G05293965Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    2. Pull the headlining as indicated by the arrow in the illustration, to detach the 4 claws. Then remove the headlining.
      Fig 10: Pulling Headlining
      G05293966Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  17. REMOVE ROOF SIDE RAIL GARNISH ASSEMBLY RH 
    1. Using a screwdriver, detach the 4 clips and 3 claws. Then remove the garnish.

      HINT:

      Tape the screwdriver tip before use.

  18. REMOVE ROOF SIDE RAIL GARNISH ASSEMBLY LH 

    HINT:

    Use the same procedures described for the RH side.

    Fig 11: Identifying Clips And Claws
    G05293967Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  19. REMOVE ROOF HEADLINING ASSEMBLY CENTER 
    1. Using a clip remover, remove the 5 clips.
    2. Using a screwdriver, detach the 3 clips labeled A and remove the headlining.

      HINT:

      Tape the screwdriver tip before use.

      Fig 12: Identifying Clips Labeled A
      G05293968Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  20. REMOVE ROOF SIDE GARNISH INNER RH 
    1. Using a clip remover, remove the clip labeled A.
    2. Using a screwdriver, detach the 7 clips and claw. Then remove the garnish.

      HINT:

      Tape the screwdriver tip before use.

  21. REMOVE ROOF SIDE GARNISH INNER LH 

    HINT:

    Use the same procedures described for the RH side.

    Fig 13: Identifying Clips, Claw And Garnish
    G05293969Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  22. REMOVE ROOF HEADLINING ASSEMBLY REAR 
    1. Using a screwdriver, detach the 7 clips and remove the headlining.

      HINT:

      Tape the screwdriver tip before use.

      Fig 14: Identifying Clips And Headlining
      G05293970Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
scientia non olet · About LEMON Manuals