Rear Speaker: Removal

HINT:

• Use the same procedures for the RH side and LH side.
• The procedures listed below are for the LH side.

1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL 
   CAUTION: Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to prevent airbag and seat belt pretensioner activation.
2. REMOVE REAR SEAT CUSHION ASSEMBLY (See  REMOVAL  ) 
3. REMOVE REAR SEAT HEADREST PLATE COVER (See  REMOVAL  ) 
4. REMOVE WIND DEFLECTOR BOARD ASSEMBLY (See  REMOVAL  ) 
5. REMOVE REAR SEAT HEADREST PLATE (See  REMOVAL  ) 
6. REMOVE REAR SEAT HEADREST ASSEMBLY (See  REMOVAL  ) 
7. REMOVE REAR SEATBACK ASSEMBLY (See  DISASSEMBLY  ) 
8. REMOVE DOOR SCUFF PLATE ASSEMBLY LH (See  REMOVAL  ) 
9. REMOVE QUARTER TRIM PANEL ASSEMBLY FRONT LH 
10. REMOVE REAR SPEAKER ASSEMBLY LH 
    1. Disconnect the connector.
    2. Remove the clamp.
    3. Remove the 3 screws and speaker.
       Fig 1: Locating Rear Speaker Screws

       Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002