Rear Seat Assembly: Installation

WARNING: This page is about a different car, the 2007 Lexus SC 430. However, it is still accessible from the selected car via links, so may be relevant.

INSTALL REAR SEATBACK ASSEMBLY
1. Install the seatback with the 2 nuts and 2 bolts.
  Torque: 18 N*m (184 kgf*cm, 13 ft.*lbf)
  
  Fig 1: Locating Seatback Nuts And Bolts
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
INSTALL REAR SEAT HEADREST ASSEMBLY
1. Install the 2 headrests with the 4 nuts.
  Torque: 5.0 N*m (51 kgf*cm, 44 in.*lbf)
  
  Fig 2: Identifying Rear Seat Headrest Assembly With Nuts
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
INSTALL REAR SEAT HEADREST PLATE
1. Attach the 4 clips and 8 claws to install the 2 headrest plates.
  
  Fig 3: Identifying Headrest Plates With Clips And Claws
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
INSTALL WIND DEFLECTOR BOARD ASSEMBLY
1. Install the deflector board with the 4 bolts.
  Torque: 5.0 N*m (51 kgf*cm, 44 in.*lbf)
INSTALL REAR SEAT HEADREST PLATE COVER
1. Attach the 8 claws to install the 2 plate covers.
  
  Fig 4: Identifying Plate Covers With Claws
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
INSTALL REAR SEAT CUSHION ASSEMBLY
1. Attach the seat cushion's 2 rear hooks to the seatback.
2. Attach the seat cushion's 2 front hooks to the vehicle body.
3. Confirm that the seat cushion is firmly installed.
  
  Fig 5: Attaching Seat Cushion Rear Hooks To Seatback
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002