Multiplex Tilt And Telescopic Ecu: Installation

WARNING: This page is about a different car, the 2007 Lexus SC 430. However, it is still accessible from the selected car via links, so may be relevant.

INSTALL MULTIPLEX TILT AND TELESCOPIC ECU
1. Install the ECU with the 2 screws.
2. Connect the 2 connectors.
  
  Fig 1: Locating Multiplex Tilt And Telescopic ECU Connector
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
INSTALL NO. 4 HEATER TO REGISTER DUCT
1. Install the duct with the 3 clips.
INSTALL STEERING COLUMN COVER LOWER
1. Attach the 3 claws to the install the steering column cover lower.
2. Turn the steering wheel to the left and right as necessary to install the 2 screws.
3. Install the screw.
  
  Fig 2: Turning Steering Wheel
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
INSTALL NO. 1 INSTRUMENT PANEL AIR BAG ASSEMBLY LOWER (See INSTALLATION )
INSTALL NO. 1 INSTRUMENT PANEL SAFETY PAD SUB-ASSEMBLY (See INSTALLATION )
CONNECT CABLE TO NEGATIVE BATTERY TERMINAL
PERFORM INITIALIZATION
1. Perform initialization (see INITIALIZATION ).
  NOTE: Certain systems need to be initialized after disconnecting and reconnecting the cable from the negative (-) battery terminal.