Purge Valve: Installation

INSTALL PURGE VSV
1. Install the purge VSV with the bolt.
  Torque: 18 N*m (184 kgf*cm, 13 ft.*lbf)
2. Connect the 2 hoses and connector.
  
  Fig 1: Locating Vacuum Hose
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
INSTALL V-BANK COVER
1. Install the cover the 2 nuts.
  Torque: 5.0 N*m (51 kgf*cm, 44 in.*lbf)
CONNECT CABLE TO NEGATIVE BATTERY TERMINAL
PERFORM INITIALIZATION
1. Perform initialization (see INITIALIZATION .
  NOTE: Certain systems need to be initialized after disconnecting and reconnecting the cable from the negative (-) battery terminal.