Data List / Active Test

HINT:

Using the Techstream's Data List allows switch, actuator and other item values to be read without removing any parts. Reading the Data List early in troubleshooting is one way to save time.

1. Connect the Techstream to the DLC3.
2. Turn the ignition switch ON.
3. Read the Data List.

   Main Body: 

   DIAGNOSTIC NOTE
   
   

   Tester Display	Measurement Item/Range	Normal Condition	Diagnostic Note
   Key Unlock Warning SW	Unlock warning switch signal /ON or OFF	ON: Key is in ignition key cylinder OFF: No key is in ignition key cylinder	-
   D Door Courtesy SW	Driver side door courtesy switch signal /ON or OFF	ON: Driver side door is open OFF: Driver side door is closed	-

HINT:

Performing the Techstream's Active Test allows relay, VSV, actuator, and other items to be operated without removing any parts. Performing the Active Test early in troubleshooting is one way to save time. The Data List can be displayed during the Active Test.

1. Connect the Techstream to the DLC3.
2. Turn the ignition switch ON.
3. Perform the Active Test.

   Meter: 

   DIAGNOSTIC NOTE
   
   

   Tester Display	Test Part	Control Range	Diagnostic Note
   Key Remained Buzzer	Key reminder buzzer	ON/OFF	Confirm that the vehicle is stopped, engine idling