LEMON Manuals: Even more car manuals for everyone
Home >> Lexus >> 2008 >> RX 400h AWD >> Repair and Diagnosis >> Brakes >> Traction Control >> Brake Control >> Brake Pedal Stroke Sensor >> Removal

Brake Pedal Stroke Sensor: Removal

  1. PRECAUTION 

    (See AIRBAG SYSTEM )

  2. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL 
    CAUTION: Wait for 90 seconds after disconnecting the cable to prevent the airbag working (See AIRBAG SYSTEM ).
    NOTE: When disconnecting the cable, some systems need to be initialized after the cable is reconnected (See INITIALIZATION ).
  3. REMOVE FRONT DOOR SCUFF PLATE LH  (See REMOVAL )
  4. REMOVE COWL SIDE TRIM SUB-ASSEMBLY LH  (See REMOVAL )
  5. REMOVE INSTRUMENT PANEL FINISH PANEL SUB-ASSEMBLY LOWER  (See REMOVAL )
  6. REMOVE DRIVER SIDE KNEE AIRBAG ASSEMBLY  (See REMOVAL )
  7. REMOVE BRAKE PEDAL STROKE SENSOR ASSEMBLY 
    1. Disconnect the brake pedal stroke sensor assembly connector.
      Fig 1: Locating Brake Pedal Stroke Sensor Assembly Connector
      G05277011Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    2. Remove the 2 bolts and the brake pedal stroke sensor assembly.
scientia non olet · About LEMON Manuals