Emission Control: Canister: Installation

1. Connect the charcoal canister assembly with the 2 nuts.

   Torque: 36 N*m (367 kgf*cm, 27 ft.*lbf) 

   Fig 1: Identifying Charcoal Canister Assembly Nuts

   Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
2. Install the nut.

   Torque: 36 N*m (367 kgf*cm, 27 ft.*lbf) 

   Fig 2: Identifying Charcoal Canister Nut

   Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
3. Align the quick connector with the pipe, then push in the quick connector until the retainer makes a "click" sound to connect the charcoal canister fuel hose to the charcoal canister assembly.
   Fig 3: Aligning Quick Connector With Pipe

   Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
   NOTE:

   • Check that there are no scratches or foreign objects around the connected part of the quick connector and pipe before this work.
   • After connecting the charcoal canister fuel hose, confirm that it is securely connected by pulling the quick connector.
4. Connect the hose.
   Fig 4: Connecting Hose

   Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
5. Connect the hose and connector.
   Fig 5: Identifying Hose & Connector

   Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

1. Install the No. 3 front floor heat insulator with the 4 nuts.

   Torque: 5.5 N*m (56 kgf*cm, 49 in.*lbf) 

   Fig 6: Identifying No. 3 Front Floor Heat Insulator & Nuts

   Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

HINT:

(See INSTALLATION )