LEMON Manuals: Even more car manuals for everyone
Home >> Lexus >> 2008 >> LX 570 >> Repair and Diagnosis >> Restraints >> Restraints Control Systems >> Seat Belt >> Seat Belt Warning System >> Data List / Active Test

Data List / Active Test

  1. READ DATA LIST 

    HINT:

    Using the Techstream to read the Data List allows values or states of switches, sensors, actuators and other items to be read without removing any parts. This non-intrusive inspection can be very useful because intermittent conditions or signals may be discovered before parts or wiring is disturbed. Reading the Data List information early in troubleshooting is one way to save diagnostic time.

    NOTE: In the table below, the values listed under "Normal Condition" are reference values. Do not depend solely on these reference values when deciding whether a part is faulty or not.
    1. Connect the Techstream to the DLC3.
    2. Turn the engine switch on (IG).
    3. Turn the Techstream on.
    4. Enter the following menus: Body Electrical / (desired system) / Data List.
    5. According to the display on the Techstream, read the Data List.

      Combination Meter 

      COMBINATION METER REFERENCE

      Tester Display Measurement Item/Range Normal Condition Diagnostic Note
      Driver Side Seatbelt Warning Buzzer Driver side seat belt warning signal /ON or OFF Current customize setting displayed
      ON Active
      OFF Not active      		 -
      P-Seatbelt Warning Buzzer Front passenger side seat belt warning signal / ON or OFF Current customize setting displayed
      ON Active
      OFF. Not active      		 -

      Occupant Detection 

      ITEM RANGE REFERENCE

      Tester Display Measurement Item/Range Normal Condition Diagnostic Note
      Passenger Buckle SW Front passenger side seat belt buckle signal / Set or Unset Set Front passenger side seat belt fastened
      Unset. Front passenger side seat belt unfastened      		 -

      SRS Airbag 

      ITEM RANGE REFERENCE

      Tester Display Measurement Item/Range Normal Condition Diagnostic Note
      Left side Buckle SW Driver side seat belt / Set or Unset Set. Driver side seat belt fastened
      Unset. Driver side seat belt unfastened      		 -
      Right side Buckle SW Front passenger side seat belt / Set or Unset Set Front passenger side seat belt fastened
      Unset. Front passenger side seat belt unfastened      		 -
  2. PERFORM ACTIVE TEST 

    HINT:

    Using the Techstream to perform Active Tests allows relays, VSVs, actuators and other items to be operated without removing any parts. This non-intrusive functional inspection can be very useful because intermittent operation may be discovered before parts or wiring is disturbed. Performing Active Tests early in troubleshooting is one way to save diagnostic time. Data List information can be displayed while performing Active Tests.

    1. Connect the Techstream to the DLC3.
    2. Turn the engine switch on (IG).
    3. Turn the Techstream on.
    4. Enter the following menus: Body Electrical / Combination Meter / Active Test.
    5. According to the display on the Techstream, perform the Active Test.

      Combination Meter 

      CONTROL RANGE REFERENCE

      Tester Display Test Part Control Range Diagnostic Note
      Driver Side Seat Belt Driver side seat belt warning light ON or OFF Confirm that the Vehicle is Stopped and Engine Idling
      Front Passenger Side Seat Belt Front passenger side seat belt warning light ON or OFF Confirm that the Vehicle is Stopped and Engine Idling
scientia non olet · About LEMON Manuals