Customize Parameters
- CUSTOMIZING FUNCTION WITH THE TECHSTREAM (REFERENCE) NOTE:
- When the customer requests a change in a function, first make sure that the function can be customized.
- Be sure to make a note of the current settings before customizing.
- When troubleshooting a function, first make sure that the function is set to the default setting.
- Connect the Techstream to the DLC3.
- Turn the engine switch on (IG).
- Turn the Techstream on.
- Enter the following menus: Customize Setting.
- Select the setting by referring to the table below.
Security
SECURITY SETTING CHARTDisplay Default Contents Setting Passive Mode (Security System) OFF Passive arming mode is a function that switches the theft deterrent system from the arming preparation state to the armed state 30 seconds after the key is not inside vehicle and the driver side door is closed In passive arming mode, the theft deterrent system will judge that a theft is taking place and switch to the alarm sounding state if one of the following operations is not performed within 14 seconds (see entry delay below) after the door is opened - Unlock any door by a key or wireless operation
- Turn the engine switch on (IG)
ON/OFF Warning by Horn ON Function that allows the vehicle horns and security horn to be used as a warning device. ON/OFF Entry Delay Time 14 s Function that changes the entry delay time (time before warning starts) for passive arming mode 0 s/14 s/30 s