Data List / Active Test
- READ DATA LIST
HINT.
Using the Techstream to read the Data List allows values or states of switches, sensors, actuators and other items to be read without removing any parts. This non-intrusive inspection can be very useful because intermittent conditions or signals may be discovered before parts or wiring is disturbed. Reading the Data List information early in troubleshooting is one way to save diagnostic time.
NOTE: In the table below, the values listed under "Normal Condition" are reference values. Do not depend solely on these reference values when deciding whether a part is faulty or not.- Connect the Techstream to the DLC3.
- Turn the engine switch on (IG).
- Turn the Techstream on.
- Enter the following menus: Body Electrical / Main Body or Power Back / Data List.
- According to the display on the Techstream, read the Data List.
Main Body
DIAGNOSTIC NOTETester Display Measurement Item/Range Normal Condition Diagnostic Note D Door Courtesy SW Driver side door courtesy switch signal / ON or OFF ON Driver side door open
OFF. Driver side door closed- P Door Courtesy SW Passenger side door courtesy switch signal / ON or OFF ON: Passenger side door open
OFF Passenger side door closed- RL Door Courtesy SW Rear door courtesy switch LH signal / ON or OFF ON Rear side door LH open
OFF. Rear side door LH closed- RR Door Courtesy SW Rear door courtesy switch RH signal / ON or OFF ON Rear side door RH open
OFF Rear side door RH closed- Back Door Courtesy SW Back door courtesy switch signal / ON or OFF ON: Back door open
OFF Back door closed- D Lock Pos switch Driver side door lock position switch signal / ON or OFF ON. Driver side door lock unlocked
OFF Driver side door lock locked- P Lock Pos switch Passenger side door lock position switch signal / ON or OFF ON. Passenger side door unlocked
OFF. Passenger side door locked- RL Lock Pos switch Rear door LH lock position switch signal / ON or OFF ON Rear side door LH unlocked
OFF. Rear side door LH locked- RR Lock Pos switch Rear door RH lock position switch signal / ON or OFF ON or Rear side door RH unlocked
OFF Rear side door RH locked- Back Lock Pos switch(1) Back door lock position switch signal / ON or OFF ON. Back door unlocked
OFF Back door locked- (1) w/o Power Back Door System Power Back (w/ Power Back Door System)
DIAGNOSTIC NOTETester Display Measurement Item/Range Normal Condition Diagnostic Note Door lock status Back door lock status signal/ UNLOCK or LOCK UNLOCK Back door unlocked
LOCK Back door locked- Wireless PBD SW Operation Transmitter switch operation condition signal/1 TIME, 2 TIMES, 0 8 sPR, OFF or 1 Motion Current customize setting displayed - - ACTIVE TEST
HINT:
Using the Techstream to perform Active Tests allows relays, VSVs, actuators and other items to be operated without removing any parts. This non-intrusive functional inspection can be very useful because intermittent operation may be discovered before parts or wiring is disturbed. Performing Active Tests early in troubleshooting is one way to save diagnostic time. Data List information can be displayed while performing Active Tests.
- Connect the Techstream to the DLC3.
- Turn the engine switch on (IG).
- Turn the Techstream on.
- Enter the following menus: Body Electrical / Main Body, Body No. 4, Mirror or Smart Access / Active Test.
- According to the display on the Techstream, perform the Active Test.
Main Body
DIAGNOSTIC NOTETester Display Test Part Control Range Diagnostic Note Hazard Turn signal flasher relay ON or OFF - Door Lock All door lock motors OFF or LOCK - D-Door Unlock Driver side door unlock motor OFF or UNLOCK - Body No. 4
DIAGNOSTIC NOTETester Display Test Part Control Range Diagnostic Note Rear Step Light Step lights OFF or ON - Mirror
DIAGNOSTIC NOTETester Display Test Part Control Range Diagnostic Note Foot Light Foot lights ON or OFF - Smart Access
DIAGNOSTIC NOTETester Display Test Part Control Range Diagnostic Note Wireless Buzzer operation Wireless door lock buzzer ON or OFF -