Inspection Procedure

HINT:

After the inspection is completed, clear the DTCs (See DTC CHECK / CLEAR  ).

1. CHECK IF A PROPER CD IS INSERTED 
   1. Make sure that the CD is an audio CD or a CD with an MP3 or WMA file, and that it is not deformed, flawed, stained, burred, or otherwise defective.

      OK: Normal CD. 

      HINT:

      • Translucent or uniquely-shaped CDs cannot be played.
      • CDs with adhesive paper labels should not be played.
      • Commercial audio CDs can be played.
      • CD-DA files on CD-ROMs, CD-Rs, and CD-RWs can be played.
      • MP3 and WMA files on CD-ROMs, CD-Rs, and CD-RWs can be played.
      • For details on playable CDs, refer to the Owner's Manual.

   NG: CD IS FAULTY 

   OK: Go to next Step 

2. REPLACE CD WITH ANOTHER AND RECHECK 
   1. Replace the CD and recheck.
      1. Replace the CD with a normal one.
      2. Clear the DTCs (See DTC CHECK / CLEAR  ).
      3. Recheck for DTCs and check if the same trouble code is output.

         OK: No DTC is output. 

   NG: REPLACE RADIO RECEIVER ASSEMBLY  (See REMOVAL  )

   OK: END