Shift Lever: Inspection
- INSPECT TRANSMISSION CONTROL SWITCH
- Measure the resistance between each terminal of the shift lock control unit assembly when the shift lever is moved to each position.
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
Standard resistance
TESTER CONNECTION SPECIFIED CONDITION REFERENCE CHARTTester Connection Shift Lever Position Specified Condition 3 (IG) - 7 (S) S, "+" and "-" Below 1 Ω 2 (SFTU) - 5 (E) Continuously held in "+" (Up-shift) Below 1 Ω 1 (SFTD) - 5 (E) Continuously held in "-" (Down-shift) Below 1 Ω 3 (IG) - 7 (S) Not in S, "+" and "-" 10 kΩ or higher 2 (SFTU) - 5 (E) S 10 kΩ or higher 1 (SFTD) - 5 (E) S 10 kΩ or higher If the resistance is not as specified, replace the transmission floor shift assembly
- Measure the resistance between each terminal of the shift lock control unit assembly when the shift lever is moved to each position.