LEMON Manuals: Even more car manuals for everyone
Home >> Lexus >> 2008 >> LS 600hL >> Repair and Diagnosis >> Transmission >> Automatic Trans >> Hybrid Transaxle - Service Information >> Shift Lever >> Disassembly

Shift Lever: Disassembly

  1. REMOVE SHIFT POSITION INDICATOR 
    1. Remove the 2 screws and detach the 3 hooks Then remove the shift position indicator from the rear console upper panel
      Fig 1: Locating Shift Position Indicator Screws With Hooks
      G05781051Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  2. REMOVE CONTROL POSITION INDICATOR PLATE 
    1. Using a small screwdriver, detach the claw and remove the indicator plate.
      2. Fig 2: Removing Control Position Indicator Plate
      G04948531Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  3. REMOVE SHIFT LEVER CAP 
    1. Detach the 2 claws and remove the shift lever cap
  4. REMOVE POSITION INDICATOR LENS 
    1. Using a small screwdriver, detach the 4 claws and remove the lens from the shift position indicator.
      Fig 3: Identifying Position Indicator Lens Claws
      G04948532Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  5. REMOVE POSITION INDICATOR SLIDE COVER 
    1. Remove the position indicator slide cover from the shift position indicator.
      2. Fig 4: Identifying Position Indicator Slide Cover
      G04948533Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    2. Remove the No. 2 slide cover from the slide cover.
  6. REMOVE SHIFT LOCK RELEASE BUTTON 
    1. Using a small screwdriver, detach the claw and remove the button.
      Fig 5: Removing Shift Lock Button
      G04948534Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  7. REMOVE INDICATOR LIGHT WIRE SUB-ASSEMBLY 
    1. Disconnect the connector clamp.
    2. Using a small screwdriver, detach the 2 claws and remove the wire.
      Fig 6: Identifying Indicator Light Wire Claws And Clamp
      G04948535Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
scientia non olet · About LEMON Manuals