Shift Lever Position Sensor: Inspection

INSPECT PARK/NEUTRAL POSITION SWITCH

Measure the resistance according to the value(s) in the table below when the shift lever is moved to each position.

Fig 1: Identifying Park/Neutral Position Switch Connector Terminals

Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

Standard resistance

PARK/NEUTRAL POSITION SWITCH RESISTANCE CHART

	7 (+B) -1 (P)	7 (+B) - 2 (N)	7 (+B) - 3 (D)	7 (+B) - 4 (MJ)	7 (+B) - 5 (R)	7 (+B) - 6 (RV)	7(+B) - 8 (B)	7 (+B) - 9 (FD)
P position	Below 1 Ω	4.2 to 5.1 kΩ	10 kΩ or higher	Below 1 Ω	10 kΩ or higher	10 kΩ or higher	10 kΩ or higher	10 kΩ or higher
R position	10 kΩ or higher	4.2 to 5.1 kΩ	10 kΩ or higher	Below 1 Ω	Below 1 Ω	Below 1 Ω	10 kΩ or higher	10 kΩ or higher
N position	10 kΩ or higher	Below 1 Ω	10 kΩ or higher	Below 1 Ω	10 kΩ or higher	10 kΩ or higher	10 kΩ or higher	10 kΩ or higher
D position	10 kΩ or higher	4.2 to 5.1 kΩ	Below 1 Ω	Below 1 Ω	10 kΩ or higher	10 kΩ or higher	10 kΩ or higher	Below 1 Ω
B position	10 kΩ or higher	4.2 to 5.1 kΩ	10 kΩ or higher	Below 1 Ω	10 kΩ or higher	10 kΩ or higher	Below 1 Ω	Below 1 Ω

If the results are not as specified, replace the park/neutral position switch.