LEMON Manuals: Even more car manuals for everyone
Home >> Lexus >> 2008 >> LS 600hL >> Repair and Diagnosis >> Restraints >> Restraints Control Systems >> Seat Belt >> Shoulder Belt Anchorage >> Removal

Shoulder Belt Anchorage: Removal

  1. REMOVE LUGGAGE COMPARTMENT MAT SUB-ASSEMBLY  (See REMOVAL )
  2. REMOVE BATTERY SERVICE HOLE COVER LH  (See REMOVAL )
  3. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL 
    CAUTION: Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to prevent airbag and seat belt pretensioner activation.
    NOTE:
    • After the power switch is turned OFF, the HDD navigation system requires approximately 6 minutes to record various types of memory and settings. As a result, after turning the power switch OFF, wait 6 minutes or more before disconnecting the cable from the negative (-) battery terminal.
    • When disconnecting the cable, some systems need to be initialized after the cable is reconnected (see INITIALIZATION ).
  4. REMOVE FRONT SEAT OUTER BELT ASSEMBLY 
    1. Remove the front seat outer belt (see REMOVAL ).
  5. REMOVE HEIGHT ADJUSTABLE ANCHOR MOTOR 
    1. Remove the connector
    2. Pull the motor downward to remove it from the adjuster as shown in the illustration.
    Fig 1: Pulling Motor Downward
    G04944473Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  6. REMOVE FRONT SHOULDER BELT ANCHOR ADJUSTER ASSEMBLY 
    1. Remove the 2 bolts and adjuster
    Fig 2: Locating Bolts And Adjuster
    G04944474Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
scientia non olet · About LEMON Manuals