Shoulder Belt Anchorage Switch: Inspection

1. INSPECT HEIGHT ADJUSTABLE ANCHOR SWITCH (for LH Side) 
   1. Measure the resistance according to the value (s) in the table below

   Standard resistance

   TESTER CONNECTION SPECIFIED CONDITION CHART
   
   

   Tester Connection	Switch Condition	Specified Condition
   2 (UL) - 3 (UP)	UP	Below 1 Ω
   1 (DW) - 3 (UP)	UP	10 kΩ or higher
   1 (DW) - 2 (UL)	DOWN	Below 1 Ω
   2 (UL) - 3 (UP)	DOWN	10 kΩ or higher

   Fig 1: Identifying Height Adjustable Anchor Switch Connector Terminal - (For LH Side)

   Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

   If the result is not as specified, replace the switch

2. INSPECT HEIGHT ADJUSTABLE ANCHOR SWITCH (for RH Side) 
   1. Measure the resistance according to the value (s) in the table below.
   Fig 2: Identifying Height Adjustable Anchor Switch Connector Terminal (For RH Side)

   Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

Standard resistance

Result:

If the result is not as specified, replace the switch.