Data List / Active Test

HINT.

Using the intelligent tester or Techstream to perform Active Test allows relays, VSVs, actuators and other items to be operated without removing any parts. This non-intrusive functional inspection can be very useful because intermittent operation may be discovered before parts or wiring is disturbed Performing Active Tests early in troubleshooting is one way to save diagnostic time Data List information can be displayed while performing Active Tests

1. Connect the intelligent tester or Techstream to the DLC3.
2. Turn the power switch ON (IG).
3. Turn the tester on.
4. Enter the following menus.
   1. Intelligent tester - Select: DIAGNOSIS / OBD/ MOBD / BODY SYSTEM / METER /ACTIVE TEST
   2. Techstream - Select. Body Electrical / Combination Meter / Active Test.
5. According to the display on tester, perform the "ACTIVE TEST" or "Active Test".
   1. Intelligent tester

      METER:

      TESTER DISPLAY CHART
      
      

      Tester Display	Test Part	Control Range	Diagnostic Note
      D-BELT REMIND	Driver side seat belt warning light	ON or OFF	-
      P-BELT REMIND	Front passenger side seat belt warning light	ON or OFF	-

   2. Techstream

   Combination Meter:

   TESTER DISPLAY CHART
   
   

   Tester Display	Test Part	Control Range	Diagnostic Note
   Indicat Lamp D-seat Belt	Driver side seat belt warning light	ON or OFF	-
   Indicat Lamp P-seat Belt	Front passenger side seat belt warning light	ON or OFF	-