On-Vehicle Inspection
- INSPECT COOLER CONDENSER ASSEMBLY
- If the fins of the cooler condenser are dirty, clean them with water. Dry the fins with compressed air.NOTE: Do not damage the fins of the condenser.
- If a fin of the cooler condenser is bent, straighten it using a screwdriver or pliers.
- If the fins of the cooler condenser are dirty, clean them with water. Dry the fins with compressed air.
- CHECK CONDENSER FOR REFRIGERANT GAS LEAK
- Using a halogen leak detector, check the pipe joints for gas leakage
- If gas leakage is detected in a joint, check the torque of the joint