LEMON Manuals: Even more car manuals for everyone
Home >> Lexus >> 2008 >> LS 600hL >> Repair and Diagnosis >> Heating, Ventilation & A/C (HVAC) >> HVAC Control Systems >> Air Conditioning >> Ambient Temperature Sensor >> Installation

Ambient Temperature Sensor: Installation

  1. INSTALL AMBIENT TEMPERATURE SENSOR 
    1. Attach the clamp to install the sensor
    2. Connect the connector.
  2. INSTALL FRONT BUMPER COVER 
    1. Install the front bumper cover (See INSTALLATION )
  3. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL 
    NOTE: When disconnecting the cable, some systems need to be initialized after the cable is reconnected (see INITIALIZATION ).
    Fig 1: Identifying Ambient Temperature Sensor Clamp
    G04950741Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  4. INSTALL BATTERY SERVICE HOLE COVER LH  (See INSTALLATION )
  5. INSTALL LUGGAGE COMPARTMENT MAT SUB-ASSEMBLY  (See INSTALLATION )
  6. CHECK SRS WARNING LIGHT 
    1. Check the SRS warning light (see DIAGNOSIS SYSTEM ).
scientia non olet · About LEMON Manuals