Typical Enabling Conditions
TYPICAL ENABLING CONDITIONS
| Monitor runs whenever following DTCs are not present | P0010, P0020 (VVT-iE Bank 1, 2) P0011 (VVT System 1 - Advance) P0012 (VVT System 1 - Retard) P0021 (VVT System 2 - Advance) P0022 (VVT System 2 - Retard) P0031, P0032, P0051, P0052 (A/F sensor heater - Sensor 1) P0102, P0103, P010C, P010D (MAF meter) P0115 - P0118 (ECT sensor) P0120 - P0223, P2135 (TP sensor) P0125 (Insufficient ECT for Closed Loop) P0335 (CKP sensor) P0351 - P0358 (Igniter) |
| Fuel system status | Closed loop |
| Battery voltage | 11 V or higher |
| When either condition below is met | Condition 1 or 2 |
| 1 Engine RPM | Less than 1100 rpm |
| 2 Intake air amount per revolution | 0 29 g/rev or more |
| Catalyst monitor | Not executed |