LEMON Manuals: Even more car manuals for everyone
Home >> Lexus >> 2008 >> LS 600hL >> Repair and Diagnosis >> Engine Mechanical >> Fuel System >> Fuel >> FUEL INJECTOR (for Direct Injection) >> Inspection

FUEL INJECTOR (for Direct Injection): Inspection

  1. INSPECT FUEL INJECTOR ASSEMBLY 
    NOTE: This inspection aims at inspecting the fuel injectors for opens or shorts, because the fuel injectors of this vehicle are a high-pressure type and a fuel injection volume inspection cannot be performed.
    1. Measure the resistance according to the value (s) in the table below.

      Standard resistance 

      RESISTANCE REFERENCE

      Tester Connection Condition Specified Condition
      1 - 2 20°C (68°F) 2.01 to 2.31 Ω
      Fig 1: Measuring Resistance Between Fuel Injector Connector Terminals
      G05772898Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

      If the result is not as specified, replace the injector assembly

scientia non olet · About LEMON Manuals