Instrument Panel Safety Pad: Reassembly

HINT.

A bolt without a torque specification is shown in the standard bolt chart (see SPECIFIED TORQUE FOR STANDARD BOLTS )

1. INSTALL AUTOMATIC LIGHT CONTROL SENSOR 
   1. Attach the 2 claws to install the sensor
   Fig 1: Installing Automatic Light Control Sensor

   Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
2. INSTALL NO. 1 DEFROSTER NOZZLE GARNISH 
   1. Attach the 6 claws to install the garnish.
   Fig 2: Identifying No. 1 Defroster Nozzle Garnish Claws

   Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
3. INSTALL NO. 2 DEFROSTER NOZZLE GARNISH 
   1. Attach the 6 claws to install the garnish
   Fig 3: Identifying No. 2 Defroster Nozzle Garnish Claws

   Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
4. INSTALL NO. 1 METER HOOD RETAINER 
   1. Install the 2 retainers with the 2 screws.
   Fig 4: Identifying No. 1 Meter Hood Retainer

   Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
5. INSTALL NO. 2 INSTRUMENT PANEL WIRE (for Leather Covered Type) 
   1. Attach the 5 clamps to install the wire.
   Fig 5: Identifying No. 2 Instrument Panel Wire With Clamps
   Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
   2. Connect the connector.
6. INSTALL NO. 2 INSTRUMENT PANEL WIRE 
   1. Attach the 4 clamps to install the wire.
   Fig 6: Identifying No. 2 Instrument Panel Wire Clamps
   Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
   2. Connect the connector.
7. INSTALL NAVIGATION ANTENNA ASSEMBLY (for DVD)  (See INSTALLATION )
8. INSTALL NAVIGATION ANTENNA ASSEMBLY (for HDD)  (See INSTALLATION )
9. INSTALL TIRE PRESSURE WARNING ECU 
   1. Install the ECU with the bolt.
   Fig 7: Identifying Tire Pressure Warning ECU And Bolt

   Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
10. INSTALL NO. 2 HEATER TO REGISTER DUCT 
    1. Install the duct with the 2 screws.
    Fig 8: Identifying No. 2 Heater To Register Duct Screws
    Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
11. INSTALL FRONT PASSENGER AIRBAG ASSEMBLY  (See INSTALLATION )
12. INSTALL NO. 3 HEATER TO REGISTER DUCT 
    1. Install the duct with the 3 screws
    Fig 9: Identifying No. 3 Heater To Register Duct Screws

    Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
13. INSTALL NO. 1 HEATER TO REGISTER DUCT 
    1. Install the duct with the 3 screws.
    Fig 10: Identifying No. 1 Heater To Register Duct Screws

    Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
14. INSTALL NO. 1 INSTRUMENT PANEL PIN 
    1. Install the 2 pins with the 2 screws
    Fig 11: Identifying No. 1 Instrument Panel Screws And Pin

    Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
15. INSTALL NO. 2 SIDE DEFROSTER NOZZLE DUCT 
    1. Attach the claw to install the duct
    2. Install the screw
    Fig 12: Identifying No. 2 Side Defroster Nozzle Duct Screw

    Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
16. INSTALL DEFROSTER NOZZLE ASSEMBLY 
    1. Install the nozzle with the 3 screws.
    Fig 13: Identifying Defroster Nozzle Assembly Screws

    Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
17. INSTALL NO. 1 SIDE DEFROSTER NOZZLE DUCT 
    1. Attach the claw to install the duct
    2. Install the screw
    Fig 14: Identifying No. 1 Side Defroster Nozzle Duct Screw

    Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
18. INSTALL POWER SWITCH 
    1. Attach the 2 claws to install the switch
    Fig 15: Installing Power Switch
    Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002