LEMON Manuals: Even more car manuals for everyone
Home >> Lexus >> 2008 >> LS 600hL >> Repair and Diagnosis >> Electrical >> Body Electrical >> Clock & Power Outlets >> Clock >> Removal

Clock & Power Outlets: Clock: Removal

  1. REMOVE LUGGAGE COMPARTMENT MAT SUB-ASSEMBLY  (See REMOVAL )
  2. REMOVE BATTERY SERVICE HOLE COVER LH  (See REMOVAL )
  3. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL 
    NOTE:
    • After the power switch is turned OFF, the HDD navigation system requires approximately 6 minutes to record various types of memory and settings. As a result, after turning the power switch OFF, wait 6 minutes or more before disconnecting the cable from the negative (-) battery terminal.
    • When disconnecting the cable, some systems need to be initialized after the cable is reconnected (see INITIALIZATION ).
  4. REMOVE INSTRUMENT PANEL FINISH PANEL END LH  (See REMOVAL )
  5. REMOVE INSTRUMENT PANEL FINISH PANEL END RH  (See REMOVAL )
  6. REMOVE SHIFT LEVER KNOB SUB-ASSEMBLY  (See REMOVAL )
  7. REMOVE NO. 3 BOX PANEL  (See REMOVAL )
  8. REMOVE REAR UPPER CONSOLE PANEL  (See REMOVAL )
  9. REMOVE UPPER CONSOLE PANEL SUB-ASSEMBLY  (See REMOVAL )
  10. REMOVE RADIO RECEIVER ASSEMBLY WITH BRACKET  (See REMOVAL )
  11. REMOVE MULTI-DISPLAY ASSEMBLY WITH BRACKET  (See REMOVAL )
  12. REMOVE CLOCK ASSEMBLY 
    1. Using a screwdriver, detach the 2 claws and remove the clock

      HINT.

      Tape the screwdriver tip before use.

      Fig 1: Removing Clock Using Screwdriver
      G04945886Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
scientia non olet · About LEMON Manuals